Handle the pressure of extreme workboat conditions.
OPT™ Marine Power is a lubricity additive uniquely combined with a dispersant-stabilizer and combustion catalyst that keeps the fuel system clean and improves the combustion of fuel. It improves lubricity, cetane number, provides injector detergency, corrosion inhibition, and fuel stabilization. It removes and prevents deposits in the fuel system which can deteriorate fuel economy and emissions. Designed for handling at low temperatures.
.png)
Application
For best results, OPT™ Marine Power should be dosed into the fuel oil line before the manifold, during bunkering, via a chemical metering pump.
For personal safety, first aid, storage and handling, see the safety data sheet (SDS) for product specific information.
Packaging & Storage
Store away from heat, sparks and open flame.
WARNING:
Do not expose to temperatures exceeding 167F° (75C°) or to compression.
Benefits
O.P.T.™ Marine Power is a fuel additive that provides workboats the following functional and performance benefits:
- Improves lubricity
- Reduces emissions, white smoke and black smoke
- Cleans and maintains injector cleanliness
- Improves fuel stability
- Cetane number increase
- Reduces storage tank sludge formation
- Corrosion inhibition
- Improves fuel economy
Precautionary Statement
Use only in approved manner. Do not contaminate drinking water. Dispose of empty container in accordance with local, state and federal rules Do not re-use empty container. Avoid inhalation of fumes. When handling use rubber gloves and face shiel, wash after handling. Consult Innospec for questions and specific directions for use. Buyer assumes al risks of storage or handling of this material that are not in strict accordance with dir3ections given, Consult the MSDS sheet for additional information. Store in a dry place away from food stuffs with the lid tightly sealed. For commercial use only.
Typical Appearance
Appearance........................................................Clear Amber Liquid
Specific Gravity, 60/60°F…………….......................0.967
Flash Point (PMCC).………………...........................145°F/62.8°C (PMCC)
Auto ignition temperature.................................>100°C
Dosage
Recommended Treat Rate: 1:1000 gallons
Different dosages might be suggested depending on the quality of the fuel or the specific operating conditions. AFS personnel available to assess specific issues and advise on an alternative dosage program.
Call or email to learn more.
